Ce Declaration Of Conformity - Expert E230116 Manual Del Usario

PLACING THE MACHINE IN SERVICE
Always use of an air line lubricator with these machine.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm through the machine's inlet connection.
3
Model
E230116
Model Free speed
rpm
E230116 6700
* k = measurement uncertainty in dB
WE, EXPERT S.A.S., 6/8 RUE GUSTAVE EIFFEL - BP 99 - 91 423 MORANGIS CEDEX FRANCE, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE
PRODUCT E230116 – EXPERT 3/4" AIR IMPACT WRENCH
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN ISO 11148-6: 2012
EN ISO 12100:2010
EN ISO 15744:2008
EN ISO 28927-2:2009
LUBRIFICATION
• BEFORE EACH OPERATION, CHECK:
- Only use suitable EXPERT sockets and flogging spanner accessories, (''IMPACT'') as well as
safety devices, bush and pin for mounting one of these cases on a drilled driving
square.
- The drive square condition (no marks, cracks or excessive wear).
- The condition of the safety devices (bush and pin) on the drilled square as well as the draw
bead on the non-drilled square.
Square Impact Breakaway
drive rate
''
3/4 925
Air consumption
l/min
198
** k = measurement uncertainty in m/s²

CE DECLARATION OF CONFORMITY

Torque
Pressure dB(A)
N.m k*
1400 96,8 3
Working pressure Weight
bar kg
6,2 4,75
EMERGENCY
GATE VALVE
Noise level
Power dB(A) Pressure dB(C)
k*
107,8 3 120
Dimensions
mm
235 x 79 x 206
EXPERT QUALITY MANAGER
Vibrations
level
m/s
2
k* k**
3 9,6 1,45
27.07.2012