Monitor Setup; Adjusting Picture; Visual Eq Operation; Adjusting The Brightness - Alpine PKG-RSE2 Manual De Operación

Monitor Setup

Adjusting Picture

Visual EQ, Brightness, color, tint, contrast and sharpness are
adjustable.
• Each source is independently adjustable.
• Make adjustments within 6 seconds, otherwise the OSD (On Screen
Display) will turn off automatically.
• After adjusting, the "OFF" setting in Visual EQ changes to
"CUSTOM". After resetting the unit, "CUSTOM" changes back to
"OFF"
1
Press SETUP button on the remote control.
Or press and hold the SELECT button on the Front
Control Keys for at least 2 seconds to open SETUP
screen. The PICTURE setting menu is highlighted.
SELECT

VISUAL EQ Operation

You can select a mode suitable for the subject image.
2
To change VISUAL EQ, press
through the OSD as OFF, NIGHT MOVIE, SOFT,
SHARP and HIGH CONT. (Default: OFF)
VISUAL EQ mode (manufacturer's settings) selection
(VISUAL EQ MODE)
OFF:
NIGHT MOVIE: Suitable for movies in which dark
SOFT:
SHARP:
HIGH CONT.:
Book_PKG-RSE2.indb Book_PKG-RSE2.indb 17 17
Front Control Keys
SETUP
Remote Control
or to cycle
Normal Setting (Visual EQ OFF)
scenes frequently appear.
Suitable for CGs and animated
fi lms.
Suitable for old movies where
images are not clearly shown.
Suitable for recent movies.
• "OFF" will change to "CUSTOM", when any of the picture
mode (Brightness, Color, Tint, Contrast and Sharpness) has been
adjusted
• NIGHT MOVIE, SOFT, SHARP and HIGH CONT. are fi xed values.
They cannot be set manually. If the picture mode is changed, they
automatically change to CUSTOM mode.
• To return OFF mode, press RESET on the picture mode, or change
values of BRIGHT, COLOR, TINT, CONTRAST and SHARPNESS
to 0 manually.
3
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.

Adjusting the Brightness

2
Press or and select BRIGHT.
3
Press or to adjust the brightness. Brightness
can be adjusted from –15 (MIN) to +15 (MAX).
4
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.

Adjusting the Color Density

2
Press or and select COLOR.
3
Press or to adjust the color density. Change
depth can be adjusted from –15 (MIN) to +15 (MAX).
4
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
17
-EN
4/8/06 4/8/06 2:17:24 AM 2:17:24 AM