Setting The Source Name; Setting The Auto Level Control; Setting The Screen Modes; Setting The Tv System - Alpine PKG-RSE2 Manual De Operación

Setting the Source Name

3
Press or and select SOURCE NAME.
DVD:
Source name of DVD can not be changed to other names.
AUX 1:
or
Press o select AUX1/EX-DVD/DVD-HU/DVB-T/
t
ISDB-T/TV/GAME/USER* (Default: AUX1)
AUX 2:
or
Press to select AUX2/EX-DVD/DVD-HU/DVB-T/
ISDB-T/TV/GAME/USER* (Default: AUX2)
Customizing Source Name
Your desired OSD source name can be defi ned up to 6 characters.
4
Press or to select USER.
5
Press ENTER key. Character setting menu
appears.
6
Press , , or
character "A-Z", "0-9", "-", space and ".".
"DEL":
"CLR":
"OK":
• If no key is pressed within 6 seconds, OSD disappears and the
source name will not be changed.

Setting the Auto Level Control

Auto Level Control adjusts the sound volume
automatically. This function balances sound volume for
all sources.
3
Press or to turn ON/OFF Auto Level Control.
(Default: ON)
Book_PKG-RSE2.indb Book_PKG-RSE2.indb 19 19
The currently selected
source name
The currently selected
source displays on
Source Name menu
Video Signal menu is
for AUX1 only
and ENTER key to select the
Delete one character at a time.
Clear entire characters.
Confi rm source name and exit
from character setting menu.

Setting the Screen Modes

Display mode on the screen can be adjusted to Wide,
Cinema and Normal. (Default: WIDE)
3
Press or to select WIDE/CINEMA/NORMAL
WIDE
Normal images are expanded uniformly in the
horizontal direction and are displayed over the entire
screen.
CINEMA
Normal images are expanded in the horizontal and
vertical directions. The top and bottom of the image
are cut off. This mode is suited for 16:9 cinema size
images.
NORMAL
Normal image (4:3)
4
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.

Setting the TV System

Broadcast TV System can be manually switched.
3
Press or
to select AUTO/NTSC/PAL. (Default:
AUTO)

Setting the Video Signal

3
Press or
to select Composite/S-Video.
(Default: Composite)
Video Signal selection menu is only available in AUX1
source.
AUX1 must be connected with either Composite cable
or S-Video cable. You can not connect both cables at
the same time. It may cause noise on the screen.
Refer to System Connection (Page 28)
19
-EN
4/8/06 4/8/06 2:17:28 AM 2:17:28 AM