Kenwood LS-X70 Manual De Instrucciones página 5

3 Connect the speaker wires to the speaker output terminals of the amplifier.
Using as Front speakers
Right
RED WHITE
+
-
R FRONT A L
7 Bi-wiring connection
This speaker is capable of bi-wiring connection, with which the woofer and midrange/tweeter units can be driven
independently. To connect each speaker in the bi-wiring connection, prepare two speaker wires (commercially available)
and connect them as shown below.
1 Remove the shorting plates.
Left
Wire with white line
Speaker terminals
(Amplifier or AV control center)
1 Loosen the four knobs.
Using as Surround speakers
Right
+
-
• When using the speaker as the surround back speaker,
connect the speaker wire to the surround back speaker
output terminals.
2 Remove the shorting plates.
Left
Wire with
white line
SURROUND
GRAY BLUE
R L
Shorting plate
To be continued.
5
EN