Original Instructions; Guarantee; Declaration Of Conformity; Specified Use - Cibo Finit-All SMFA 2018 Manual De Instrucciones

Manual
Finit-All

ORIGINAL INSTRUCTIONS

1.

GUARANTEE

If the machine is used according to instructions
CIBO offers a 12-month guarantee. Parts affected
by normal wear and tear fall outside the scope
of this guarantee. CIBO is released from all guar-
antee obligations if the user performs operations
on the device during the guarantee period.
2.

DECLARATION OF CONFORMITY

We, being solely responsible: Hereby declare
that these Finit-All angle grinders, identified by
type and serial number *1), meet all relevant
requirements of directives *2) and standards *3).
Technical documents for *4) - see page 3.
3.

SPECIFIED USE

The Finit-All is suitable for
• grinding
• sanding
• cut-off grinding and wire brushing metal,
concrete, stone and similar materials without
the use of water.
The user bears sole responsibility for any dama-
ge caused by inappropriate use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must
be observed.
4. GENERAL SAFETY
INSTRUCTIONS
For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Reading the operating
instructions will reduce the risk of injury.
WARNING – Read all safety warnings
and instructions.
Failure to follow all safety warnings and
instructions may result in electric shock, fire and/
or serious injury.
Keep all safety instructions and information
for future reference.
Pass on your power tool only together with
these documents.
5. SPECIAL SAFETY
INSTRUCTIONS
5.1 General Safety Recommendations
Use
a) This power tool is intended to function as
a grinder, sander, wire brush or cut-off tool.
Read all safety warnings, instructions, illus-
trations and specifications provided with
this power tool. Failure to follow all instructions
listed below may result in electric shock, fire
and/or serious injury.
b) Operations such as polishing are not
recommended to be performed with this
power tool. Operations for which the power
tool was not designed may create a hazard and
cause personal injury.
c) Do not use accessories which are not spe-
cifically designed and recommended by the
tool manufacturer. Just because the accessory
can be attached to your power tool, it does not
assure safe operation.
EN
Finit-All Ι 29