The camera emits a voice message:
In case that the connection failed, press and hold the Reset button until the camera
emits the voice message: "Restore factory default settings". Then repeat the
process.
IMPORTANT
In some devices is necessary to enter the ID number of the camera to complete
the Wi-Fi pairing. Follow the next process:
1. In the main screen select Add Manua-
lly or Add Network device (depends on
the used device)
28
Wi-Fi connected
2. In the Device ID field enter the ID
number that it is localized it in the rear
label of the camera, also you can scan the
QR code.
ID:23029598