EGAmaster DRAINMATIC 100 Manual De Instrucciones página 7

1. Plug in the machine (switch must be in "OFF" position").
2. Switch on the machine (select "FOR" position).
Note: OFF – Stop
FOR – Forward rotation
REV – Reverse rotation
3. Introduce the spring by hand into the pipe until it stops (obstruction zone).
4. Press handle; the spring will start turning and will clear the obstruction zone.
Steps 2 and 3 must be followed until the pipe is totally clean.
5. Once the pipe is totally clean, introduce the spring (A) by hand into the machine taking care not
to introduce water or any other form of contamination into the machine.
6. Switch off the machine (select "OFF" position).
Unplug it of the mains.
1
4
OPERATING INSTRUCTIONS
2
5
3
6
7