Figure 5
4
1, 2
PAGE 3 OF 9
ASSEMBLY CONTINUED
CHAIR ADJUSTMENTS
3
1-800-295-5510
uline.com
5. Slowly lower chair assembly onto the gas lift. Press
down on seat cushion to secure in place.
(See Figure 5)
1. Seat Height Adjustment – To raise seat height, lift
lever up with little to no weight on the seat. To lower
seat height, lift lever up while sitting.
2. Upright Tilt Lock – To lock the chair in an upright
position, push the lever in toward the center of the
seat. To restore tilt, pull lever out. Chair has standard
tilt; the seat and back tilt simultaneously at the same
ratio.
3. Tilt Tension – To increase tilt tension, turn knob
clockwise. To decrease tilt tension, turn knob
counterclockwise.
4. Armrest Height Adjustment – To adjust arm height,
press the button on the side of each armrest and
move the armrest up or down.
0721 IH-6861