Barkan CM310 Instrucciones De Montaje página 10

EN
CAUTION! Ignoring the safety instructions may lead to the falling of the mount/shelf
and/or the electrical appliance. If you are not able to/or lack the experience to carry
out wall or ceiling installation, contact a suitable professional installer or contact the
store of purchase for further advice. If installed by an appropriate professional, please,
make sure he/she has the necessary experience in assembling mounts and has read and
understood the safety and assembly instructions.
1. Wall/ceiling installation surface – The supplied screws and bolts are only suitable
for attaching to walls and ceilings made of: concrete, standard 10 cm or more concrete
blocks, wood studs/joists of minimum depth 10 cm. (Standard 7 cm concrete blocks are
suitable for the installation of fixed mounts or movement mounts carrying electrical
appliances weighing a maximum of 25 kg). Do not install on walls and ceilings made of:
gypsum board, drywall, light processed blocks, silicate boards/bricks, dry, weak or very
old blocks or wooden panel! For installation on gypsum or light processed blocks please
call an authorized installer or appropriate building specialist to install the product.
2. Position and height of the installed product – Install in such a place where collision
with the product will not lead to injuries. Do not install in hallways or above beds and
chairs.
3. Keep children and unnecessary bystanders away from the assembly area.
4. Tightening of bolts and screws – Carefully tighten all bolts and nuts of 6 mm / ¼ inch
diameter or less, in order to avoid breakage.
5. Installation strength check – After installing the mount/shelf to the wall or ceiling,
perform a strength test of the weight load as indicated in the assembly instructions.
6. Checking the electrical component attachment to the mount – Following the
installation of your home entertainment component, check that it is well connected,
securely attached (per instructions) and can not slip off or disconnect. If unsure
regarding the connection of the component to the mount, consult either the store of
purchase or visit our website at www.barkanmounts.com and open the FAQ (frequently
asked questions) page or contact us through the site.
7. Mounts with quick connect/disconnect mechanism – After connecting your home
entertainment component to the mount, make sure it is well connected by pulling
slightly on the connection. When disconnecting the component – Whilst holding the
component firmly, remove the security bolt (if one present), press the disconnect
mechanism and remove the component carefully according to the assembly instructions.
8. Periodic maintenance checks – One month after installation, please check that:
A. The mount is tight against the wall/ceiling. B. The home entertainment component
is well attached to the mount/shelf. C. The nuts, bolts and belts (CRT models) have
not loosened. Repeat the maintenance checks every six months following installation.
SAFETY INSTRUCTIONS & WARRANTY
If any faults are found, remove the home entertainment component from the mount and
reassemble the mount as per the assembly instructions.
9. Movement mounts – Oil slightly all pivot points on installation (except the pivot
points inside the LCD/Plasma tilt mechanism) and afterwards once a year or whenever
movement becomes difficult.
A. TV (CRT)/VCR mounts – To adjust the viewing angle of the component – push or pull
the mount only. Do not push or pull your home entertainment component.
B. LCD/Plasma/Projector mounts can be turned and tilted by moving the actual screen
or projector. Be careful to carry out all movements gently.
Barkan Mounts Ltd. is not responsible for the installation.
Please ask your installer for an installation warranty certificate.
PRODUCT LIABILITY – product warranty years appears on product
packaging as well as in company website www.barkanmounts.com
Dear Customer – Thank you for purchasing Barkan's high quality product. We wish you
many hours of pleasant viewing and listening. Barkan Mounts Ltd. undertakes to repair
or replace this product in our warehouse, free of charge, to the extent that due to a
manufacturing flaw or improper raw materials. If a claim is made under this guarantee,
the product should be returned prepaid freight, with the original purchasing document to
your dealer or to Barkan distributor.
This warranty does not apply to:
1. Ignoring of safety & assembly instructions.
2. Coating defects.
3. Normal wear. Friction damages.
4. Installing other products to the mount/ shelf, not manufactured by Barkan.
5. Modification or repairs not made by Barkan.
6. Damage caused by accident or force majeure.
7. Damage caused by misuse or abuse or harm to the product.
8. Mounting the product to the wall/ ceiling. Installing the electrical appliance to the
product.
9. Breakage of the plastic covers.
10. Any damage caused to the electronic equipment or to the surrounding by the use of
this product.
11. Any item put inside Barkan's waterproof case.
2