Charge Status Indicator - Cicli Esperia E230U BOURGET Manual De Uso

5.2. As soon aas you try to brake with one of the two brake levers, by means of
special sensors the control device will stop the power supply to the motor, which will
stop the pedal assist.
5.3. By releasing the brake levers, the control device will be ready to operate the
motor again.
WARNING: Slow down in case of rain. Use the brake levers in moderation. Adherence
of the tread to the road surface decreases in case of wet surfaces.
Do not touch the rotors immediately after use as they may reach high temperatures.
BURN HAZARD
6.

Charge status indicator

6.1. To check the battery power level, a special indicator on the battery pack will
indicate the charge that remains.
NOTE: in the event of sudden climbs such as bumps, overpasses or various types
of slopes, the indicator will turn off some LEDs as a result of an additional power
demand from the motor.
If the bicycle is not used for 30 minutes/1 hour, the battery automatically shuts off.
To turn it back on, press the power button located beside it.
86
6.2. You can read the battery charge status on the
LED indicator:
• When the battery is fully charged, 4 LEDs will light
up.
• To check the status of charge of the battery during
normal operation, with bicycle still, it is suffi cient to
press the button
• If the battery should be partially discharged, the
number of illuminated leds progressively decreases,
until remaining with one single led.
• If the battery is completely low, a single blinking red
led will alert the user to urgently charge the battery.
6.3. During normal operation, another indicator on
the handlebar bend will provide the user with an
instant indication of the energy status of the battery
pack.
located beside the battery.