Troubleshooting; Care And Maintenance - Homewerks Worldwide Home2O 3F169BDCH Manual De Instrucciones

TROUBLESHOOTING

PROBLEM
No water flow from installed showerhead.
Low water pressure or missing spray patterns.
Leaking at pipe or pivot ball connection.

CARE AND MAINTENANCE

To ensure a good performance, clean the filter screen regularly.
1. Remove the showerhead from the shower arm to get to filter screen.
2. Run the filter screen under water for a few minutes to flush out any build-up.
3. A small soft brush can be use to gently brush away any mineral deposits.
4. Place the filter screen back into the ball joint of the showerhead and re-insall the showerhead to the shower arm.
Clean showerhead periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the finish and void your warranty.
To help clear away lime scale build-up, soak showerhead in a 1:1 ratio of vinegar and water.
ROUGH-IN
ONE YEAR LIMITED WARRANTY
The distributor warrants to the original consumer purchaser this product to be free from
defects in material and workmanship under normal use in residential applications. At its option,
the Company will provide repair parts or replace defective product when the product is used
in accordance with the manufacturer's specifications.
Use of mild abrasive, abrasive or chemical cleaners may damage the finish of the faucet. We
recommend cleaning your faucet with a soft cloth, moistened with water. Damage resulting
from the use of abrasive or chemical cleaners SHALL VOID THIS WARRANTY.
This warranty is not applicable to any products or parts of products where damage is caused
by use of non-genuine parts; is due to installation error, product misuse, negligence or faulty
maintenance; or where the product is not installed according to local building codes.
www.homewerksww.com
CORRECTIVE ACTION
1. Confirm previous showerhead washer is not in the shower arm.
2. Confirm there is only one washer in the pivot ball of the new showerhead.
1. Clean showerhead using a vinegar and water solution. (See care and
maintenance section).
2. Clean filter screen.
3. Water pressure under 20 PSI.
1. Confirm only one washer is seated on top of the filter screen.
This warranty excludes labor charges or damage incurred during installation, repair or
replacement, and any indirect, incidental or consequential damages, losses, injury or costs
of any nature. This warranty is in lieu of and excludes all other warranties, conditions and
guarantees, whether expressed or implied, including without restriction those of
merchantability or fitness of use.
Liability under this warranty will not exceed the purchase price for the product claimed to
be defective by the original consumer purchaser. Some states or provinces do not allow
the exclusion or limitation of consequential damages so the above limitations or exclusions
may not apply. This warranty gives you specific legal rights and you may also have other
rights which vary from state to state, or province to province.
Inquiries regarding warranty claims can be directed to (877) 319-3757, 8 a.m. - 5 p.m., CST,
Monday - Friday.
3