Avidsen Clair-X1 Manual Del Usuario página 12

C - INSTALLATION
1. Check the kit's content before set-up.
Ensure you do not obstruct the upper openings so as not to obstruct the air intake.
2. Connect the mains adaptor to the back of the purifier then to a wall socket.
Note
Connect the mains adaptor to the air purifier before plugging it into a wall socket.
D - USING THE PRODUCT
1 - FEATURES
Operating mode
Level 1
Level 2
Turbo mode
Stop
ON/OFF
EN 4
Activation
Press the on/off button
Press the on/off button in turbo mode
Press the turbo button in turbo mode
Press the on/off button twice
Press the turbo button
Press the on/off button in level 2
Hold down the on/off button for longer
than two seconds in any mode
Hold down the turbo button for longer
than two seconds in any mode
3. Press the on/off button to switch the product on
Details
Low
speed
Normal
speed
High speed
Automatically changes to low
speed after two hours
Stop ventilation
Indicator light on or off (does not
affect filtration)
Corresponding button
symbol