Beper BB.002 Manual Del Usuario página 8

Electric kettle Use instructions
To remove lime scale, use
White wine vinegar 8°
Fill the kettle with ½ liter of vinegar.
Let it for about one hour without heating it.
Empty the kettle and rinse 5 or 6 times.
Repeat if necessary.
Acid citric
Make boiled 1 liter of water – add 25 g of acid citric and let it rest for about 15 minutes.
Empty the kettle and rinse it 5 or 6 times.
Repeat if necessary.
Do not use other methods or detergents to remove limescale.
In case of
Use while empty
The kettle is on but without water in or the limescale activates the safety system and blocks the unit: let the
kettle cool down and fill it with water. Use the on/off switch to turn it on: the kettle will start again after approx.
15 Minutes.
Smelly water
It does happen when the kettle is new. For the first times of use, throw away water. If the problem remains, fill
the kettle to max. Level, and add 2 spoons of bicarbonate; boil it, throw away water and rinse the kettle body.
Technical data
Power: 1370-1630W
Power supply: 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
8