Courtyard Creations RTS691C Instrucciones De Montaje página 2

FIGURE 2
9
10
12
2
4
10
12
#7 BOLT M8*40
Step 2:
Fasten the seat post (#4) to the support frame (#2) by
using bolts (#7), washers (#9 and #10), and jam nuts
(#12). See Figure 2.
FIGURE 4
#8 BOLT M6*35
Step 4:
Insert the seat post (#4) into the hole in the center of the
base assembly (#3). Fasten them together by using bolt
(#8) and washer (#11). Make sure that all of the bolts
have been tightened completely. See Figure 4.
Note:
For ease with installation, we recommend that the seat
post (#4) be slightly oiled or waxed before fastening to
the base assembly (#3).
V-3
7
7
9
4
2
40
4
3
11
8
35
STOP
FIGURE 3
Step 3:
Place the decorative plastic cover (#5) on top of the
chair's base assembly (#3) as illustrated above in
picture A. See Figure 3.
FIGURE 5
Step 5:
Place cushions (#16 and #17) onto the swivel chair.
Secure the cushion to the swivel chair by using the
plastic clamps. See Figure 5.
Caution:
To ensure one's safety during use of this swivel chair,
make sure that all of the bolts are completely tightened.
This chair has the ability to swivel; therefore, use by
young children should be adult supervised.
DO NOT RETURN TO STORE!
PAGE 2 OF 3
5
A
A
5
3
16
17
3