aqprox appR300V2 Guia Del Usuario página 26

Network Name (SSID) and Channel. The Access Point can be set simply
with only the minimum setting items.
Disable Wireless On/Off
Wireless:
Band: Supports 11G/11G/11N mixed modes.
SSID: Main Service Set Identifier. ItÊs the "name" of your wireless
network.
Broadcast Select „enable‰ to enable the device's SSID to be visible by
SSID: wireless clients
Channel This field determines which operating frequency will be
Number: used. The default channel is set to Auto, so the AP will
choose the best channel automatically. It is not necessary
to change the wireless channel unless you notice
interference problems with another nearby access point.
5.7 Wireless Security Configuration
Please click „Wireless-> Security‰ located at the web management
interface, the following message will be displayed on your web browser:
Setup the wireless security and
encryption to prevent from
unauthorized access and
monitoring. Supports 64/128-bit
WEP, WPA, WPA2 encryption
methods.