Hitachi RAK-18QH8SW Manual Del Usuario página 15

HOW TO SET THE SLEEP TIMER
Set the current time at fi rst if it is not set before (see the pages for setting the current time). Press the
(SLEEP) button, and the display changes as shown below.
SLEEP
How to Cancel Reservation
Point the signal window of the remote controller toward the indoor unit, and press the
The (RESERVED) sign goes out with a beep and the
All manuals and user guides at all-guides.com
Mode
4
Sleep timer
Sleep Timer: The device will continue working for the designated
number of hours and then turn off.
Point the signal window of the remote controller toward the indoor unit,
and press the SLEEP button.
The timer information will be displayed on the remote controller. The
TIMER lamp lights with a beep from the indoor unit. When the sleep
timer has been set, the display indicates the turn-off time.
AM
H
Sleep
Start
timer
1
Set the ON-timer.
2
Press the (SLEEP) button and set the sleep timer.
AM
H
AM
(TIMER) lamp turns off on the indoor unit.
– 12 –
Indication
1 hour 4 2 hours 4 3 hours
Sleep timer off
Example: If you set 3 hours sleep
time at 11:38 p.m., the turn-off time
is 2:38 a.m.
The device will be turned off by the sleep timer
and turned on by on-timer.
For heating:
In this case, the device will turn off in
2 hours (at 1:38 a.m.) and it will be
turned on 6:00 next morning.
(CANCEL) button.
4 7 hours
1