Tabla de contenido
Publicidad
EN
Congratulations on buying a machine from the fastest growing brand for electric, gasoline and pneumatic
machines - RAIDER. With proper installation and operation, RAIDER are reliable and reliable machines, and the work
with them will bring you real pleasure. For your convenience, there is an excellent service network with 45 service
stations all over the country.
Before using this machine, please read this "Instruction for Use" carefully. For the sake of your safety and to
ensure its proper use, read these instructions carefully, including the recommendations and warnings therein. To
avoid unnecessary errors and incidents, it is important that these instructions remain available for future reference to
anyone who will use the machine. If you sell it to a new owner, the "Instruction for Use" must be handed over to the
new owner so that the new user can read the relevant safety precautions and operating instructions.
"Euromaster Import Export" Ltd is an authorized representative of the manufacturer and owner of the trademark
RAIDER. The address of the company's management is in Sofia 1231, 244 Lomsko Shosse Blvd., tel. 02934 33 33, 934
10 10, www.raider.bg; www.euromasterbg.com; e-mail: info @ euromasterbg.com.
Since 2006 the company has introduced the ISO 9001: 2008 quality management system with scope of certification:
Trade, import, export and servicing of professional and hobby electric, pneumatic and mechanical tools and general
hardware. The certificate is issued by Moody International Certification Ltd, England.
Parameter
Model
Nominal supply voltage
Frequency of alternating current
Output voltage
Charge Current Size
Protection class
Rated voltage
Idling speed
Diameter of the tool hinged in the chuck
Maximum torque
Type of battery packs
Electric battery charge
1. General instructions for safe operation.
Read all instructions carefully. Failure to follow the instructions below may result in electric shock, fire and / or serious injury.
Keep these instructions in a safe place.
1.1. Safety at work.
1.1.1. Keep your workplace clean and well lit. Crash and inadequate lighting can contribute to the occurrence of an accident
at work.
1.1.2. Do not operate the cordless drill in environments with an increased risk of explosion, near flammable liquids, gases
or dust.
During work, the spark plug may cause sparks that may ignite dust or vapors.
1.1.3. Keep children and side faces at a safe distance while working with the cordless drill.
If your attention is diverted, you may lose control of the cordless drill.
Original Instruction for Use
Dear Users,
Technical data
Charger
Cordless Drills
Measure
Value
unit
-
RDP-CDL30
V AC
230
Hz
50
V DC
13.5
mA
400
-
V DC
12
min
0-550
-1
mm
10
Nm
26
-
1,5
Ah
1,5
9
II
Publicidad
Tabla de contenido
