Battery Safety; Assembly; To Assemble The Blower Tube; Operation - Poulan Pro PRB675i Manual Del Usuario

Remove the battery pack before you do maintenance.

Battery safety

Only use battery packs from the manufacturer and only
charge them in a battery charger from the manufacturer.
The rechargeable battery packs are only used as a
power supply for related cordless products. To prevent
injury, the battery pack must not be used as a power
source for other devices.
• Do not disassemble, open or shred battery pack.
• Do not keep battery packs in open sunlight or heat.
Keep battery packs away from fire.
• Regularly examine the battery pack charger and the
battery pack for damage. Damaged or changed
battery packs can cause a fire, explosion or risk of
injury. Do not repair or open damaged battery packs.
• Do not use a battery pack or product that is
defective, changed or damaged.
• Do not change or repair products or the battery pack.
Only let your approved dealer do repairs.
• Do not short circuit a cell or battery pack. Do not
save battery packs in a box or drawer where they
can be short circuited by other metal objects.
• Do not remove a battery pack from its initial package
until necessary for operation.
• Do not mechanically shock battery packs.
• If there is a battery leak, do not let the liquid touch
the skin or eyes. If you have touched the liquid,
clean the area with a large quantity of water and get
medical aid.
WARNING: Read the safety chapter before
you assemble the product.

To assemble the blower tube

WARNING: Read and understand the safety
chapter before you operate the product.
317 - 003 - 20.11.2017
• Do not use a battery charger other than what is
specified for operation with the battery pack.
• Look at the plus (+) and minus (-) marks on the
battery pack and product to make sure of correct

operation.

• Do not use a battery pack not made for operation
with the product.
• Do not mix battery packs of a different voltage or
manufacturer in a device.
• Keep battery packs away from children.
• Always purchase the correct battery packs for the
product.
• Keep batteries clean and dry.
• Clean the battery pack terminals with a clean dry
cloth if they become dirty.
• Secondary battery packs must be charged before
use. Always use the correct battery charger and
refer to the manual for correct charging instructions.
• Do not keep a battery pack on continuous charge
when not in operation.
• Save the manual to refer to it in the future.
• Only use the battery pack for its necessary
operation.
• Remove the battery pack from the product when not
in operation.
• Keep the battery pack away from paper clips, keys,
nails, screws, or other small metal objects while in
operation. This can make a connection between
terminals. Shorting the battery pack terminals
together can cause burns or a fire.

ASSEMBLY

1. Align the tab on the blower tube to the powerhead.
2. Connect the blower tube to the powerhead until you
hear a click. Make sure they are locked together.
3. Connect the nozzle to the blower tube until you hear
a click. Make sure they are locked together.
OPERATION

Before you start the product

• Examine the product for missing, damaged, loose or
worn parts.
• Examine the nuts, screws and bolts.
7