Sauder Barrister Lane 414722 Instrucciones De Montaje página 21

17 17
A2
Slide the SHELF MOLDING (S) onto the notched edge of an ADJUSTABLE SHELF (J). Repeat this step for the other SHELF
MOLDING and ADJUSTABLE SHELF.
Push the RUBBER SLEEVES (2R) over the remaining METAL PINS (1R). Insert the METAL PINS into the hole locations of your
choice in the ENDS (A2) and UPRIGHT (B2). Set the ADJUSTABLE SHELVES (J) onto the METAL PINS.
*U.S. Patent No. 5,499,886
414722
B2
J
S
1R
2R
(8 used)
www.sauder.com/services
A2
J
S
S
J
Notched edge
Page 21