Metra 95-6552B Instrucciones De Instalación página 2

DASH DISASSEMBLY
1. Unclip and remove the dashboard trim
panel surrounding the radio display and
instrument cluster. (Figure A)
2. Remove (4) 9/32" screws securing the
radio display, then unplug and remove
the display. (Figure B)
3. Unclip, unplug, and remove the climate
control panel. (Figure C)
Continue to Kit Preparation
2
(Figure A)
(Figure B)
(Figure C)
KIT PREPARATION
1. Cut the sub-dash to allow room for the
aftermarket radio. (Figure A)
Note – do not cut into snap locations.
2. Remove the clips from the factory
climate control and secure them to the
radio trim panel. (Figure B)
Continue to Kit Assembly
Remove shaded area
(Figure A)
(Figure B)
|
386.257.1187 MetraOnline.com