• Digital Antenna/Satellite
Data
00 : xx (Don't care)
[Data 01][Data
02] : Major Channel Number
Data
01 : High byte Channel Data
Data
02 : Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data
04] : Minor/Branch Channel Number
(Don't care in Satellite)
Data
03 : High byte Channel Data
Data
04 : Low byte Channel Data
Data
05 : Input Source (Digital/Satellite for Japan)
- 02 : Antenna TV (DTV)
- 07 : BS (Broadcasting Satellite)
- 08 : CS1 (Communication Satellite 1)
- 09 : CS2 (Communication Satellite 2)
• Tune Command Examples:
1 Tune to the digital antenna (ISDB-T) channel 17-1.
Set ID
= All = 00
Data
00 = Don't know Physical = 00
Data
01 & 02 = Major is 17 = 00 11
Data
03 & 04 = Minor/Branch is 1 = 00 01
Data
05 = Digital Antenna TV = 02
Total = ma 00 00 00 11 00 01 02
2 Tune to the BS (ISDB-BS) channel 30.
Set ID
= All = 00
Data
00 = Don't know Physical = 00
Data
01 & 02 = Major is 30 = 00 1E
Data
03 & 04 = Don't Care = 00 00
Data
05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07
28
* This feature is varied based on the model.
Ack
[a][
][Set
ID][
][OK][Data 00][Data
[Data 02][Data 03][Data 04][Data
[x][a][
][Set
ID][
][NG][Data
20 Channel Skip/Add (Command: m b)
► To skip current channel for next time.
Transmission
[m][b][
][Set
ID][ ][Data][Cr]
Data
00 : Del(ATSC,ISDB)/Skip(DVB)
Data
01 : Add
Ack
[b][
][Set
ID][ ][OK/NG][Data][x]
* Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
21 Key (Command: m c)
► To send IR remote key code.
Transmission
[m][c][
][Set
ID][ ][Data][Cr]
Data
: Key code - page 18
Ack
[c][
][Set
ID][ ][OK/NG][Data][x]
22 Control Backlight (Command: m g)
► To control the backlight.
Transmission
[m][g][
][Set
ID][ ][Data][Cr]
Data
Min : 00 to Max : 64
Ack
[g][
][Set
ID][ ][OK/NG][Data][x]
01]
05]
00][x]