Radio Operation; Snooze Function - Hamilton Beach Commercial 840173300 Manual Del Usuario

840173300 Ev03.qxd 2/5/08
Operation
How to Set the Clock
Display will flash until clock has been set.
1. Plug cord into a polarized 120V outlet.
2. Turn Function Dial to S
ET
correct hour is shown in display. Press Minute button
until correct minute is shown in display.
NOTE: Pressing and holding Hour and Minute buttons will
advance time automatically. Press and release buttons to
advance one hour or one minute at a time.
3. Once correct time is set, turn Function Dial to C

Radio Operation

1. Slide ALARM/OFF/ON switch to O
2. Slide Band Switch to AM or FM.
3. Turn Volume Control to desired volume.
4. Turn Tuning Control to select desired station.
Antenna: For AM reception, this unit features an integrated
ferrite core antenna. For FM reception, an antenna is built into
power cord. For best reception, make sure that power cord is
extended to its full length.
2:53 PM Page 6
T . Press Hour button until
IME
.
LOCK
position.
N
6
Operation
(cont.)
Wake to Radio
Once desired station and volume level is set:
1. Slide ALARM/OFF/ON switch to A
2. Turn Function Dial to S T
ET IME
buttons until desired wake time is shown in display. Turn
Function Dial to C . The wake time is now set in
LOCK
memory.
3. To check wake time, turn Function Dial to S
and set wake time will be displayed.
4. Set MP3/Radio Switch on back of clock to R
5. The radio will turn on at set wake time. To turn radio off,
slide ALARM/OFF/ON switch to O
Wake to Buzzer
Set controls as in "Wake to Radio," but set volume control to
B /O . The buzzer will turn on at set wake time. To turn
UZZ FF
buzzer off, slide ALARM/OFF/ON switch to O
To change radio, slide ALARM/OFF/ON switch to O
and set volume control to desired level.

Snooze Function

Pressing Snooze Bar allows about 9 minutes extra sleep time
after the radio alarm comes on.
position.
UTO
. Press Hour and Minute
A
ET LARM
.
ADIO
position.
FF
position.
FF
position
N
7