Tabla de contenido
Publicidad
Understanding 140T Hubs
Top rows:
Port Activity
Bottom rows:
Port Speed
4
Port LEDs
On the 140T, the port LEDs are located on a common panel with the hub
LEDs. These LEDs indicate port status, individual port speed, and port
activity.
1
2
Port
9
10
Activity
1
2
Port
9
10
Speed
LED
Status
Port Activity
Solid green
Blinking green
Blinking orange
Off
Port Speed
Solid green
Off
Partitioned ports
A port is automatically disabled (partitioned) by the hub when an invalid
condition occurs, such as too many consecutive collisions.
Once the hub is able to transmit data to the port collision free, the hub
automatically re-enables (unpartitions) the port. Clients are usually not
affected by a partitioned port because the port is often unpartitioned very
quickly.
Usually, a partitioned port indicates an overloaded network or a
malfunctioning device (like an adapter card) on the network. To alleviate an
overloaded network, divide the network into smaller segments so that fewer
devices share the same fixed amount of bandwidth.
3
4
5
6
7
11
12
13
14
15
3
4
5
6
7
11
12
13
14
15
Meaning
Device linked.
Receiving activity on that port.
Port auto-disabled (partitioned). See below.
No link detected.
Device connected at 100Mbps
Device connected at 10Mbps.
8
Solid green = Link
Blinking green = Activity
16
Orange = Autodisabled
8
Solid Green = 100Mbps
16
Off = 10Mbps
Publicidad
Tabla de contenido
