Function
3
Second speed
4
Third speed
5
Maximum speed
Filter notification
6
7
SmartHood
8
Lamp
3. DAILY USE
3.1 Using the hood
Check the recommended speed according to
the table below.
While heating up food, cooking with covered pots.
While cooking with covered pots on multiple cooking zones or burners, gentle frying.
While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones
or burners.
While boiling and frying big quantities of food without a lid, big humidity.
It is recommended to leave the hood
operating for approximately 15 minutes
after cooking.
The control Panel is a sensor field.
Touch the symbols for 1 second to
activate the functions.
To operate the hood:
1. Turn on the appliance by pressing the
symbol.
You can now activate the functions.
2. To activate the function touch the symbol.
Description
The motor switches to second speed level.
The motor switches to third speed level.
The motor switches to maximum speed level.
Reminds to change or clean the charcoal filter and clean the
grease filter.
Indicator of the function to control hood from hob.
Turns the lights on and off.
The hoods light works independently
to other hood functions. To illuminate the
cooking surface touch the light symbol
.
To turn off the appliance press the
again.
3.2 SmartHood function
It is an automatic function which connects the
hob with a hood. Both the hob and the hood
have an infrared signal communicator. Speed
of the fan is defined automatically on basis of
mode setting and temperature of the hottest
cookware on the hob. You can also operate
the fan using the hob manually. The function
can be activated from panel of the hob.
symbol
ENGLISH
13