Publicidad
16
13.1
14.1
Attaching the seat unit to your
chassis
WARNING: Ensure all locking
devices are engaged before use.
13.1
To attach your Pioneer seat unit to
the Pioneer chassis hold the seat unit
above the chassis. Locate the seat unit
chassis connector posts into the seat
attachment slots on the chassis. Ensure
that the seat unit 'clicks' into place.
The seat unit can be fitted forward or
rearward facing. Lift the seat unit gently
by the bumper bar to check the seat unit
has locked into place.
To adjust the seat position (see 20.1)
Detaching the seat unit from your
chassis
14.1
With the seat unit facing you, pull both
seat release handles outwards and lift
the seat unit clear of the chassis.
WARNING: Always ensure your
bumper bar is attached when
your child is in the seat unit.
NOTE: Remove the child from the seat
unit before detaching from your chassis.
Publicidad
