Noise Information; Component List; Vibration Information; Technical Data - KRESS KUC61 Manual De Instrucciones

Wear ear protection
Wear dust mask
Do not dispose of batteries. Return
Li-I on
exhausted batteries to your local
collection or recycling point
Do not burn
Do not expose to rain or water

COMPONENT LIST

1. DEPTH GAUGE
2. DUST PROTECTION CAP
3. TOOL HOLDER LOCKING SLEEVE
4. FUNCTION MODE SELECTION SWITCH
5. ON/OFF SWITCH
FORWARD AND REVERSE ROTATION
6.
CONTROL
7. BATTERY PACK*
8. AUXILIARY HANDLE
9. BATTERY PACK RELEASE BUTTON
10. AUXILIARY FUNCTION BUTTON ON TILE
* Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type Designation: KUC61 KUC61.2 KUC61.91
(C50 designation of machinery, representative
of hammer)
Voltage
No load speed
Impact rate
KUC61
KUC61.91
KUC61.2
20V Max
0-1210 rpm
0-5400 bpm
impact energy
Battery model
Battery capacity
Steel
Max. drilling
Wood
capacity
Masonry
Machine weight

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined
according to EN 60745:
Vibration emission
Mode description
value
Hammer drilling
a =13.59m/s
into concrete
h,HD
chiseling a
h,Cheq
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ from
the declared value depending on the ways in which
the tool is used especially what kind of workpiece is
processed dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
2.2 J
Li-ion
/
(KAB21)
4.0 Ah /
13 mm
27 mm
24 mm
3.2 kg 2.6kg
L = 87.4dB(A)
pA
L = 98.4dB(A)
wA
3dB(A)
Uncertainty
K
K=1.5 m/s²
2
=14.11m/s K=1.5 m/s²
2
7
EN