Tabla de contenido
Publicidad
Safety message
!
GB
People's lives depend on your safe installation of our products. It is important to read, understand and follow
all instructions shipped with this product and the related add-on products. In addition, listed below are some
other important safety instructions and precautions you should follow:
•To properly install this product: you must have a good understanding of automotive electrical procedures
and systems, along with proficiency in the installation and use of safety warning equipment.
•When drilling into a vehicle structure, be sure that both sides of the surface are clear of anything that could
be damaged. Remove all burrs from drilled holes. To prevent electrical shorts, grommet all drilled holes
through which wiring passes.
•A light / sound system is a high current device. In order for it to function properly, a separate ground
connection must be made. If practical, it should be connected to the negative battery terminal. At a minimum,
it may be attached to a solid metal body or chassis part that will provide an effective ground path as long
as the equipment is to be used.
•High voltages are present inside the strobe light equipped models during and after operation. Ensure that
power is disconnected and wait at least ten minutes before removing the dome.
•Locate the equipment so the VEHICLE and CONTROLS can be operated safely under all driving conditions.
•You should frequently inspect the equipment to ensure that it is operating properly and that it is securely
attached to the vehicle.
•File these instructions in a safe place and refer to them when maintaining and reinstalling the product.
Failure to follow all safety precautions and instructions may result in property damage, serious injury, or death
to you or to others.
6
Publicidad
Tabla de contenido
