If you are concerned that the temperature display of cooler is not correct and wish to check the
temperature you will need a special fridge/freezer thermometer. You may also need a hygrometer to
check the humidity of your cooler. These are available from most supermarkets and hardware shops.
Place the thermometer and hygrometer on the middle shelf of the electric cooler, where it can be read
easily. Leave overnight, compare the temperature of the thermometer and the display in the wine
cooler. The humidity in the cooler should be between 50%-80% RH depending on the type of wine.
NOTE:
● When the power is connected, cooling system starts to work. The temperature is set on certain
position, which means that if the temperature of appliance reach the point set, Self-control
Temperature System stops cooling system so the temperature in the cabinet rises gradually.
● When the inside temperature rises above the set point, Cooling Self-control Temperature starts to
work again, the cooler enter into cooling circles.
● After you setting the temperature, the display will return to show the temperature in the cooler, but
it could turn to the point that you have set gradually.