If the scale is persistent, the cleaning should be done in the following way:
- fill the kettle with 0.5 litre of white vinegar,
- bring the vinegar to boil and leave the hot
solution inside the kettle for about 30 minutes,
- bring the vinegar to boil again,
- discard the vinegar and rinse the inside with water,
- fill the kettle with 1.0 litre of water and bring it to boil,
- discard the water and rinse the inside with water.
- no timely removal of the scale from the heating element results
in the heating element's quicker wear,
- any damage resulting from applying harsh descalling products
available in the market are not covered by the producer's warranty,
- if the power cord is damaged, it can be replaced only
by an especially constructed one (with appropriate plugs and endings).
FILTER
The filter provided is made of mesh retaining scale deposits. The filter does not remove the scale, but it
prevents any deposits from getting inside the kettle while the water is being poured in.
The filter should be cleaned regularly.
Hard water may block the filter after boiling water a couple of times. The filter can be removed and
rinsed with water or cleaned with a soft brush.
9