AFG Sport 5.5 Manual Del Propietário página 11

ASSEMBLY STEP 2
HARDWARE FOR STEP 2
PART TYPE
A HEX SOCKET BOLT
A
5
3
2
DESCRIPTION
M8X1.25PX60L
4
A
A Open HARDWARE FOR STEP 2.
QTY
B Slide RIGHT CONSOLE MAST BOOT (5) on to
3
RIGHT CONSOLE MAST (4). (5.7AT & 5.9AT ONLY)
C Pull the CONSOLE CABLE (3) away from the treadmill
base frame. Connect the CONSOLE CABLE (3) from
the MAIN FRAME (2) to the CONSOLE CABLE (3)
in the bottom of the RIGHT CONSOLE MAST (4). The
other end of the CONSOLE CABLE should be located
at the top of the mast.
D Attach RIGHT CONSOLE MAST (4) to MAIN
FRAME (2) using 3 BOLTS (A).
NOTE: Be careful not to pinch the console
cable while attaching the right console mast.
NOTE: Do not fully tighten bolts until STEP 5.
11