Duronic EPS Manual De Instrucciones página 6

• Clear a large enough area to assemble the screen. Make sure the area is
larger than the sides of the screen.
• Assembly of the screen requires at least two people for some of the steps.
• Do not assemble the screen in areas of high temperature to avoid
incurring any damage to the screen.
• Ensure that you read through this manual entirely before beginning to
assemble the screen.
• Phillips screwdriver
• Spirit level
1. Ensure your assembly area is clean and completely clear.
2. Unpack all of the parts from the box and lay them out in an orderly
way. Do not unroll the screen yet.
3. Place the screen on the flat even surface. In order to protect the
screen from getting marked or stained, ensure that the screen is kept
away from dust and dirt.
4. Decide on a location for your screen. The EPS screen can be installed
in three ways: wall mounted, ceiling mounted or tripod mounted.
Before You Begin
Tools Required for Assembly
Assembly Instructions
• Allen key (included in the box)
• Drill (if installing onto a wall)
6