Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 2
6
8
4
7
8 9
#6 BOLT M6*40
Step 2:
Fasten the center connector with ring (#3) to the middle
of the legs (#2) by using bolts (#6 and #7), washers (#4
and #8) and plastic nuts (#9). Make sure that all of the
bolts have been tightened completely. See Figure 2.
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame parts.
• Wash glass with mild soap and water, rinse thoroughly, and dry completely.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of
your table.
• When moving the table, remove the umbrella and lift. Do not drag this table.
• We recommend the use of furniture covers when not in use.
• In order to prolong the life and beauty of your table, we recommend that it be stored in a dry and secure area
during off season periods.
• Tempered glass has been used for increased strength and safety of your table. However, during windy conditions
the umbrella should be lowered and/or removed.
Warranty
• This product is covered by Courtyard Creations Inc.'s. two–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
STOP!
Missing A Part?
No Need To Go Back To
The Store
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
service.cci@polywares.com
V-4
2
2
2
9
3
40
60
#7 BOLT M6*60
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
DO NOT RETURN TO THE STORE!
STOP
FIGURE 3
2
Step 3:
Turn the table to its upright position. See Figure 3.
Note:
To use an umbrella with this table, remove the plastic
center plug and put the umbrella pole through the table
top and center connector ring.
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
PAGE 2 OF 2
Publicidad
