Maintenance And Care - Joycare JC-1423 Manual De Instrucciones

Ocultar thumbs Ver también para JC-1423:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
All manuals and user guides at all-guides.com
How to operate
Place the scale on a stable and flat surface. Before switching the product on, place
the bowl or any other container you use, on the scale platform. Switch the scale
on, pressing the ON-TARE-OFF key.The display will show"0g"or
"0.00 oz"; now the scale is ready to be used. ATTENTION: PLACE THE FOOD ON
THE SCALE BOWL ONLY WHEN THE DISPLAY HAS SHOWN" 0". In order to switch
the product off, press ON-TARE-OFF key.
Tare function
Switch on the scale first. In order to exclude the weight of any container, place it on
the scale platform and then press the ON-TARE-OFF key. Now you can read"0"on
the display. You should carry out this procedure before placing the food on the
scale. NB: Whether the container is placed on the platform before you switch the
scale on, the scale will exclude the container weight automatically.
Negative Value
When all the weight (included the container) is removed from the scale platform,
you will read a negative value on the display. In order to reset the scale to"0", just
press the ON-TARE-OFF key.
ON-TARE-OFF switching
Press the ON-TARE-OFF key to switch the scale on and off.
Auto-shut off
The product switches itself off, after some seconds of non-use.
Overload indicator
When the weight exceeds the scale capacity (5 kg), the display shows:"o-Ld".
Remove the excessive weight immediately in order to avoid product damages.
Low battery indicator
Whether the display shows "Lo", this means that batteries are flat and it is
necessary to replace them. Open the batteries compartment, placed under the
scale, and replace the flat battery by 1 new CR2032 batteries, respecting the
polarities shown in the compartment itself. The supplied batteries are for trial use
only and they may have a shorter life.

MAINTENANCE AND CARE

Place always the product on a flat and stable surface. Please clean the appliance
with a damp and soft cloth avoiding any water seepage inside the scale. Do not
use chemical detergents. Never deep the
product into water. Avoid shaking, dropping or shocking the scale. This is a
precision instrument and must be handled with care. Never try to repair the scale
by yourself but always address to specialised centres; otherwise, the warranty will
be not valid anymore. It is advisable to store the scale in a clean place. Dust, dirt,
moisture, vibration, air currents, can all cause an adverse effect on the reliability
and accuracy of your scale. When the unit is not used for a long period of time, it
is advisable to remove battery, as their leaking can damage the appliance. When
the scale is switched off, never place or lay any objects on it.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Jc-1424Jc-1425Jc-1426Jc-402

Tabla de contenido