Fan Operation - Hitachi RAK-70PPA Manual De Instrucciones

FAN OPERATION

User can use the device simply as an air circulator.
AUTO SWING OPERATION
NOTE
●
During cooling and dehumidifying operation, do not keep the de ectors swinging or in the lower position
(in the case of vertical auto swing) for a long time. It may cause dew condensation on the de ectors.
Press the MODE selector so that the display indicates
1
(FAN).
Set the desired FAN SPEED with the
display indicates the setting).
2
(HIGH)
START
Press the
a beep. Press the button again to stop operation.
STOP
VERTICAL SWING
■ To start Vertical Auto Swing
●
Press (AUTO SWING (VERTICAL)) button. The de ector(s) will start
to swing up and down.
is displayed on the LCD.
■ To cancel Vertical Auto Swing
●
Press (AUTO SWING (VERTICAL)) button again. The de ector(s)
will stop in the current position.
disappeared from the LCD.
HORIZONTAL SWING
■ To start Horizontal Auto Swing
●
Press (AUTO SWING (HORIZONTAL)) button. The de ectors will
start to swing right and left.
is displayed on the LCD.
■ To cancel Horizontal Auto Swing
●
Press (AUTO SWING (HORIZONTAL)) button again. The de ectors
will stop in the current position.
disappeared from the LCD.
(MED)
(START/STOP) button. Fan operation starts with
– 10 –
(FAN SPEED) button (the
(LOW) (SILENT)