i.safe MOBILE IS530.M1 Guia De Inicio Rapido página 7

INSTALLATION OF THE microSD CARD
The device features a microSD card slot (up to 128GB). This is located in the battery compart-
ment under the battery.
If you want to remove the microSD card, please make sure that the card is not in use by the
device. To remove the microSD card follow the instructions given in
WARNING
Do only change the microSD card when the device is switched off. Do not try to insert or remove
the microSD card when any external power supply is connected, otherwise the microSD card
may be damage.
KEYS AND SPECIAL FEATURES
(see illustration on page 2)
1
CONTROL LED: Control LEDs for charging and notification.
2
SOS BUTTON: Long press automatically selects an emergency number stored by you.
This function can only be used in conjunction with an optionally available LWP app.
3
POWER KEY: Long press to power ON/OFF the device. Short press to power ON/OFF
the standby mode.
4
CAMERA: Front camera.
5
ISM INTERFACE: See website for approved accessories: www.isafe-mobile.com
6
MAGNETIC CHARGER PORT: To charge the device with the delivered magnetic
i.safe PROTECTOR 3.0 USB cable.
7
SIDE KEY RIGHT: Optional key used by different apps, e.g. camera.
8
:
HOME KEY To go back to the homescreen.
9
CURRENT APPLICATION
10
:
BACK KEY
Back to previous screen mask.
11
MICRO USB TYP C: To charge and to connect the device with the delivered
i.safe PROTECTOR 2.0 USB cable. Connection of headphone via USB possible.
12
LOUDNESS CONTROL: Volume up/Volume down.
13
SIDE KEY LEFT: Optional key used by different apps, e.g. PTT.
IMPORTANT INFORMATION!
FACTORY RESET/ACTIVATE OEM MODE
If you have set up a Google
fore you make a factory reset. This ensures that all private data will be deleted on the device:
<Settings> <About phone>
veloper mode) back to
<Settings>
enable back to
If you do not enable the OEM unlocking, the device will always ask you to sign in with the
:
Close all applications.
Account, it is important to proceed with the following steps be-
TM
tip seven times on
<Settings> <Developer options>
<Backup & reset>
<Settings>
<Build number>
(to activate the de-
<OEM unlocking>
enable
<Factory data reset>
<Storage>.
EN 7