BenQ TRY01 Manual Del Usuario página 4

Parts of the display and their functions
Using the BenQ IFP by remote control
1. Insert the enclosed dongle into BenQ IFP's USB port.
2. You can activate functions on the screen once the remote control is connected to
its enclosed dongle as a receiver.
3. For detailed function of each button, please refer to
Pairing the remote control and the enclosed dongle
If the default pairing was unsuccessful, please follow the steps:
1. Press the
2. Insert the enclosed dongle to IFP's USB port and place the remote control near it.
3. The pairing is completed once the indicator stops flashing.
Remote control usage tips
• Aim the top front of the remote control directly at the display's remote control sensor
window when you press the buttons.
• Avoid getting the remote control wet or store it in humid environments (like
bathrooms).
• If the display's remote control sensor window is exposed to direct sunlight or strong
light, the remote control may not operate properly. In this situation, change the light
source, readjust the angle of the display, or operate the remote control from a location
closer to display's remote control sensor window.
and at the same time, and the indicator light starts flashing.
Remote control on page 10.