Connecting To A Network - Samsung 4 Serie Manual Del Usuario

You can set up your TV so that it can access SMART TV applications through your local area network
(LAN) using a wired or wireless connection.
After you have "physically" connected your TV to your network, you must configure the network
✎
connection to complete the process. You can configure the connection during the Initial Setup
process (see page 16) or after the Initial Setup process, through the TV's menu.
Network Connection - Wireless
You can connect your TV to your local area network (LAN) through a standard wireless router or modem.
To connect wirelessly, you must first attach a "Samsung Wireless LAN Adapter" (WIS12ABGNX,
WIS09ABGNX - sold separately) to either the
The LAN Port on the Wall
LAN Cable (Not Supplied)
Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce
sites and Samsungparts.com. Samsung's Wireless LAN adapter supports the IEEE 802.11a/b/g and
n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a
network connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the
network through an access point or AP (typically a wireless IP Sharer - router or modem) to transmit an
encrypted security code called an access key.
Your TV is compatible with the following security protocols:
• Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
• Encryption Type: WEP, TKIP, AES
If you select Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP or
TKIP on your AP or wireless router, Samsung TVs will not support a connection in compliance with new
Wi-Fi certification specifications.

Connecting to a Network

USB port on the back of your TV. See the illustration below.
Wireless IP Sharer
(router having DHCP Server)
English - 12
Samsung Wireless
LAN Adapter
TV Rear Panel