Samsung 4 Serie Manual Del Usuario página 25

Ocultar thumbs Ver también para 4 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Configuring a Wired Network Connection
Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network
connections. Home networks that support DHCP automatically provide the IP address, subnet mask,
gateway, and DNS values your TV needs to access the Internet so you don't have to enter them manually.
If you have a Static IP network, see your user's manual for configuration instructions.
To configure the network connection for a wired network that uses DHCP, follow these steps:
1. Connect your TV to your network as shown in one of the illustration on page 13.
2. Turn on your TV, go to the Network Settings screen. (Menu → Network → Network Settings)
3. Select Start.
4. The Network Connection screen appears, and verifies the network connection. When the connection
has been verified, the "You are connected to the Internet. If you have any problems using online
services, please contact your Internet Service Provider." message appears. Network set up is
completed.
If your TV cannot acquire network the connection values automatically or if you want to set the
connection manually, select IP Settings on the network connection screen. Set IP Setting to Enter
manually, and then enter the IP Address, Subnet Mask, Gateway, and DNS Server manually.
For more detailed information, refer to "Setting up the Wired Network" in the e-Manual.
English - 25

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

4500 serieUn32eh4500

Tabla de contenido