GENERAL DESCRIPTION
1. Spout + net filter
2. Lid release button
3. Opening lid
4. Handle
5. Water level indicator
6. On/off switch with control lamp
7. Rotating base
TECHNICAL DATA
- power: 2000W
- mains voltage: 230V ~ 50Hz
- 1.7 litre capacity
HOW TO USE THE APPLIANCE
Cordless kettle C350 is for boiling water.
It is possible to boil 0.5 – 1.7 litre of water in the kettle.
The kettle base (7) must be put on a flat and dry surface.
In the base there is some space for an excess cord. It is important for the
cord to be led from the base (7) through a special groove so that the
appliance could be stable.
Before using the kettle for the first time fill it up (2-3 times) with water, boil
the water and then empty the kettle.
The kettle can be filled with water directly through the spout (1) or after
opening the lid (3).
In order to open the lid (3) you must pull the button (2).
The kettle must not be filled up when on the base.
The kettle starts working after putting the switch (6).
The kettle working is signalled by the control lamp (6).
The kettle switches off automatically after the water has boiled.
You can stop heating water at any time by putting the switch (6).
INSTRUCTION MANUAL
CORDLESS KETTLE C350
2
1
7
EN
3
4
5
6
•
EN
9