Steren BAF-500 Manual De Instrucciones página 7

3.- CHANNEL 4-5 STEREO RCA INPUTS
The stereo RCA line level inputs can be used for connecting CD
players, Tape Decks, and other audio equipment with line level
outputs.
4.- POLARITY
Press this button to change the output polarity. It is highly
recommended to use the Normal position.
5.- HIGH CONTROL
Turn to the right to boost high frequencies, adding crispness too
percussion from drum machines, cymbals and synths. Turn to
the left to cut these frequencies, reducing sibilance or hiss. The
control has a shelving response giving +/-15dB of boost.
6.- MIDDLE CONTROL
This control allows you to set the middle frequencies.
7.- BASS CONTROL
The bass control shelving response gives 15dB of boost. Add
warmth to vocals or extra punch to guitars, drums and synths by
turning to the right. Turn to the left to reduce stage rumble, hum
or to improve a mushy sound.
8.- VOLUME
Allows you to set the volume level per channel
9.- HEADPHONES VOLUME
This control allows you to confi gure the headphones volume
level
10.- VOICE AND MUSIC CONTROLS
Use this controls to emphasize the voice or the music while
playing a song
11.- POWER ON INDICATOR
This LED lights blue when the unit is ON.
12.- 5-BAND GRAPHIC EQ
The 5-band channel graphic equalizer allows you to adjust the
frequency response of the L and R Channel bus signal, providing
a maximum of ±12dB of cut and boost for each frequency band
from the fl at position.
ENGLISH-7