Steren BAF-500 Manual De Instrucciones página 8

13.- INDICATORS
These LED indicators will light red when there is a high level
audio signal at the indicated frequency. These can be used to
detect an audio feedback frequency and then lower the
appropriate EQ fader to remove the unwanted feedback.
14.- AUX RCA OUTPUT
The Left and Right RCA outputs provide line level signal
output to a cassette deck, home audio equipment, or a recording
device.
15.- L/R MAIN MASTER VOLUME
These control the fi nal level of the signal sent to the left and right
speaker outputs and the aux RCA outputs.
16.- FUSE HOLDER & POWER CORD CONNECTOR
The cord connector is used to connect the AC power source to
your power amplifi er.
This fuse holder contains an AC primary fuse. When this fuse
blows, replace it with the same type fuse, size and power rating.
If it continuously blows, stop replacing the fuse and refer
servicing to qualifi ed personnel.
17.- POWER SWITCH
Use this switch to power unit ON or OFF. Before turning on this
unit, verify connection to the proper voltage AC source, check all
connections and turn down the level controls of equipment
connected to the outputs.
18.- SPEAKER OUTPUT JACKS
Connect to the left and right speakers.
18
ENGLISH-8