INELCO 1650 Funcionamiento página 7

SPACE HEATER 15 kW
GB
Operating Instructions
Connection
Connect space heater to mains supply through plug. Be sure to mount plug correctly.
Operation
Switch on unit and start space heater by adjusting the function switch (1) to the position required:
1/2 (7.5 kW)
1
In general
The space heater is equipped with an adjustable thermostat. The temperature required is set by means of the adjustment
button (2) after which the heater runs automatically. Before switching off the heater, it is recommended to interrupt the
heating elements and to change over to Fan for a couple of minutes in order to cool the unit before switching over to Off or
before interrupting the mains supply. If, however, the heater is interrupted by means of the main switch or if the current falls
out and the thermal cut-out is thereby activated, RESET (3) thermal cut-out when the heater has been cooled off.
PV Version (Post Ventilation)
Each time the heating elements are turned off (heating temperature reached) by the thermostat it results automatic fan
operation within 3 minutes
WARNING !

Do not cover! Danger of fire, if the equipment is covered.

Minimum distance from inflammable materials: 0.5 m!

Do not use the heater in the immediate vicinity of washbasin, bath, shower and swimming pool!

Do not use the heater in fire hazardous rooms!

Do not use the heater outdoors in rainy weather!

Do not place the heater directly under a mains outlet!
Maintenance
Clean the space heater with compressed air when it is disconnected from the mains.
VARANTEE
KEEP VALID RECEIPT OR GUARANTEE CARD
To obtain guarantee cover within the guarantee period, it is an absolute MUST that either a valid receipt or the guarantee
card is submitted to the service center together with the appliance.
1/1 (15 kW)
O
Type 1650 / 1652 / 1656
Fan
MAX
RESET
3
Off
O
MIN
2
7