cabstone SoundBOX Manual página 10

User's manual
10
Micro USB charging socket (USB)
>> For charging the internal battery.
Audio Input (AUX)
>> For alternative connecting of your source device, if not
connected via Bluetooth.
Operation LED (Logo LED)
>> Identifies the searching mode by blinking in use.
>> Identifies the charging status when charging.
1 2 3
5 6
6 CONNECTING THE DEvICES
6.1 Connecting the SoundBOX by BLUETOOTH
1. Switch on the Bluetooth function of your source device.
>> Is no Bluetooth function included, use a Bluetooth adaptor.
2. Switch the ON/OFF switch to ON.
• The SoundBOX is searching for Bluetooth devices.
>> A long beep and 2 short and deep tones ring out.
>> The operation LED blinks.
3. Search for the SoundBOX in your source device menu.
4. Select „Connect" and follow the display instructions where
necessary.
5. Type in NO password or „0000" as keyword and press OK.
>> The operating LED shines permanently, when the devices are
connected.
6.2 Connecting the SoundBOX by AUX
1. Connect the delivered 3.5 mm STEREO jack cable
to the AUX jack of the device and to your source device.
2. Select the connected audio output in the menu, where necessary.
>> When using the AUX jack, the touch function is NOT
available. Control the device by the setting options of the
connected source device.
1 Previous 2 Play/Pause
4
3 Answer phone 4 Next
5 Volume down 6 Starting/
7
7 Volume up interrupting
Bluetooth
connection
(Starting the
searching mode)