Duronic GHS37 Manual De Instrucciones página 9

1. Using one hand on the extendable
rod, and one hand holding the
water tank down, gently pull the rod
upwards to extend it higher. Do not
use the light panel to extend the rod.
Hold down the
tank
3. To wash your water tank before
use, first you will need to remove the
tank cover and then gently pull out
the light panel.
5. Assemble the power system at the bottom
of the water tank. When it is all assembled and
ready for planting, plug the power adapter into
the socket.
When the power is properly connected, the
system will make a "beep" noise, letting you
know it is ready to use.
Set Up Instructions
2. Remove the water tank cover and
take the accessories out of the tank;
power adapter, planting package and
2 bottles of nutrients.
Pull up
4. After washing and drying the tank,
you can reinstall the LED light panel
using one hand while holding the
water tank down with the other hand.
Hold down the
tank
9
Push
down to
install