Publicidad
Idiomas disponibles
Idiomas disponibles
•
Do not turn the iron upside down; there may be hot water in the water
tank.
•
Do not leave water in the water tank when not in use - this can corrode
and damage the soleplate.
•
Water will drip out of the iron if the temperature dial is not set.
•
Keep the appliance well away from surfaces and objects that can be
damaged by heat.
•
Ensure there is adequate space to operate the iron.
•
When not ironing, place the iron down onto the silicone pad, on a level
heatproof surface.
•
Use this iron only with a purpose-built ironing board.
•
Observe all of the ironing instructions and ironing temperature dot settings
given by the garment manufacturer. These guidelines are normally on the
label/s inside the garment.
•
Always ensure the water filling does not exceed the MAX mark.
•
Always unplug the iron when refilling the water reservoir.
•
Do not iron buttons or fasteners. This could damage the iron.
•
During operation do not use when the light is on. When the light turns off
the iron has reached the correct temperature.
•
Do not iron directly onto synthetic fabric - instead iron the fabric inside out
or with the synthetic fabric covered by other material to protect it.
8
Publicidad
