Duronic Si3 Manual De Instrucciones página 9

Garment Label
FILLING THE IRON
Only fill the iron with water if you intend to use the steam function. For
dry ironing, you do not need to fill the tank with water.
1. Make sure the iron is switched off and unplugged from the mains socket.
2. Fill the water jug with fresh water from the tap. If you live in a hard water
area, it is advisable to use distilled water. Avoid using water containing
softeners, perfumes or additives.
3. Open the water inlet cap on the top of the iron and slowly pour the water in
from the jug.
4. Close the cap.
USING THE IRON
1. Plug the cable into the mains socket and switch on.
2. Place the silicone pad in a place that is easy to reach.
3. Check the label inside the garment to find out what heat setting you
require for the fabric.
Ironing Temperatures
Fabric Type
Synthetic
Silk-wool
Cotton-linen
Fabric not to be ironed
How to Use
9
Thermostat
Regulation
Low temperature
Medium temperature
High temperature