PACKAGE CONTENTS
A - Top cover x 1
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install in shaded areas as these areas will not allow the batteries to fully charge and will reduce
the nighttime operating hours for your light. Ensure that the installation location is away from other nighttime light sources such as street or porch lamps. These light
sources may prevent your solar light from automatically turning on.
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the
solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and
season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
1
Preparing for installation
□ FOR FIRST TIME USE: Twist
and remove the top cover (A)
from the housing (D).
□ Remove the pull tab between
the top cover (A) and housing
(D).
□ Replace the top cover (A) on the
housing (D).
□ Firmly slide the wall mount clip (E)
into the solar housing (D).
Use and Care Guide
Solar LED Deck Light
A
B
B - AA 1.2V 1000mAh Ni-
Mh rechargeable battery
(pre-installed) x 1
C
C - Battery cover x 1
D - Housing x 1
2
Install the solar light
A
□ Clip the assembly at the post and secure the clip with screws provided (F).
D
A
D
A
D
E
D
E - Post mount
clip x 1
Please contact 1-855-HD-HAMPTON for further assistance.
Item #1005 698 118
Model #62027
E
F
F - Screw x 2
F
HAMPTONBAY.COM