Duronic BS501 Manual De Instrucciones página 9

5. The scale will display the user information which will let the user confirm the
information again. After the display, the scale will turn off automatically.
Important (Err2):
To analyse body mass, stand on the scale barefoot. If your feet are cold, if you have
poor blood pressure, or if you step onto the scale too quickly, the measurement may
be inaccurate. The Err2 message will display to indicate that there has been a
problem. Make sure your feet are warm and aligned to the electrodes. Stand still
with weight evenly balanced on each foot, and measure again.
Automatic Identification Range
1. If the user has correctly measured the fat weight, the scale will automatically
memorize the user's weight and the user can directly stand on the scale to
measure the fat weight next time without entering any information again.
2. Stand on the scale and wait for a stable weight to display.
3. Four "O" will appear and disappear from left to right when measuring.
9