Operation
A – Stop: Stops the front wash, rear wash, air speed, or
deodorizer features. The deodorizer feature is activated when the
seat sensor detects a user. If the deodorizer is stopped while the
seat is occupied, the deodorizer will reactivate for the next user.
B – Air Temp: Ceases the flushing action if the flushing function
is launched after sitting. The indicator will display the current
wind temperature. When the dry function is activated, hold the
Air Temp icon to change the wind temperature and change the
cycle of the wind level from off, to lower, to medium, to high.
This function will stop automatically after 4 minutes of
continuous drying.
C – Pulsate: Activates the pulse massage feature if the front or
rear wash feature has already been activated.
D – Rear: Activates the rear wash feature and adjusts the rear
wash water pressure. The maximum continuous wash time is 1
minute.
E – Front: Activates the front wash feature and adjusts the front
wash water pressure. The maximum continuous wash time is 1
minute.
F – Water Temp: Changes the water spray temperature from low,
to medium, to high, to OFF.
G – Seat Temp: Changes the seat temperature from low, to
medium, to high, to OFF.
H – Power: Turns the seat controls on (long audible sound) or off
(short audible sound).
I – Light: Turns the night light feature on (long audible sound) or
off (short audible sound). The lights are sensor-activated and the
room must be sufficiently dark for the lights to activate.
J – Energy-Save: When activated, after 24 hours of inactivity the
power indicator LED changes from green to amber, and the seat
temperature changes to low. After 48 hours of inactivity the
heated seat turns off. Once the seat is activated, the power
indicator LED light will change to green, the temperature changes
to the previous user setting, and the timer restarts the energy
save mode.
Care and Cleaning
For best results, keep the following in mind when caring for your
KOHLER product:
1097712-5-C
6
Kohler Co.