Control Panel; Fabric Softener - Danby DWM055WDB Manual Del Propietário

OPERATING INSTRUCTIONS

CONTROL PANEL

1. Temperature setting button
• Press this button to choose the desired water
temperature. The indicator light will illuminate
HOT, WARM or COOL.
2. Water level button
• Press this button to choose the desired water
level. The indicator light will illuminate the
numbers between 1 and 10.
3. Preset button
• Use this button to set the desired delayed start
time.
4. Function button
• Press this button to select the desired function
when a full wash program is not required.
Options will cycle through SOAK, WASH,
RINSE and SPIN.
5. Program button
• Press this button to select the desired program.
Options will cycle through HEAVY, JEANS,
NORMAL and GENTLE. The default program
is HEAVY.
6. Start/Pause button
• Press this button to start a chosen program.
• Press this button during operation to pause a
program.
• Press this button to restart a program that has
been paused.
7. Power button
• Press this button to turn the appliance on or
off.
DETERGENT
The amount of detergent required will vary based
on the amount of laundry being added to the
appliance.
Consult the below table for information on detergent
amounts to use based on the chosen water level.
Water Level
1-2
3-4
5-6
7-8
9-10

FABRIC SOFTENER

If using a fabric softener, it should be added to the
program during the last rinse. Do not open the lid
while the cycle is spinning or the softener will be
introduced at the wrong time in the cycle.
Consult the table below for information on fabric
softener amounts to use based on the chosen water
level.
Water Softener (Normal
Level - Grams)
1-2 14
3-4 20
5-6 25
7-8 30
9-10 36
7
Detergent (grams)
16-20
25-28
31-36
39-42
47-50
Softener
(Concentrated -
Grams)
5
7
10
13
16